What is this?
Temperature alarms are used to notify you when the concrete has reached a certain temperature, and by extension, strength threshold. These can even be set up to trigger if the temperature goes above or below the specified values!
💡 Alarms can only be set up through the LumiCon Mobile App
💡 Alarms can only be created or modified when the job status is 'Started'
Creating an Alarm:
Steps
- Locate your job and tap the tile to enter the job details page.
- Tap the Alarms tab in the top row to access the alarms module.
- Select Temperature Tab to navigate to the temperature alarms for the job.
- Tap New Alarm.
- Here select the desired sensors and enter the Greater-than and Lower-than thresholds for the alarm. Add more thresholds if so desired. You can configure up to 3 different Greater-than and 3 Lower-than thresholds per individual sensor.
- Once finished, tap Add to save the new alarm.
- Start the job by swiping left and pressing the green power icon. Once the job has been started, the alarms will become active.